Table of Contents
Advertisement
Note: Track Apps
Do not use them under any other driving
conditions.
Note: You cannot view or clear your results
unless your vehicle is at a complete stop
with the right arrow on the display menu
inactive. If your vehicle does not reach
100 mph (160 km/h) during the track run,
your display may not show your selected
interval's results.
Note: The pre-collision assist system turns
off when using Track Apps
switch off your stability control system.
Acceleration Timer
Displays your vehicle's rate of acceleration
for a given speed or distance range.
Accelerometer
Displays your vehicle's rate of acceleration
or deceleration. A dot moves toward the
area of acceleration or deceleration.
LEFT Acceleration or Deceleration
When accelerating or decelerating left, the
dot moves to the right on the
accelerometer.
RIGHT Acceleration or Deceleration
When accelerating or decelerating right,
the dot moves to the left on the
accelerometer.
Brake Performance
Displays your vehicle's rate of deceleration
for a given speed range.
Exhaust Mode
Gives the driver the ability to choose the
vehicle's exhaust mode. A button is on the
center stack for quick adjustment of this
setting. See Drive Control (page 27).
Mustang (CZG) GT500, United States of America, Vehicles With: SVT Performance Package, enUSA, First-Printing
Track Use
are for track use only.
or when you
Note: The Track exhaust mode setting is
only for use at tracks and not for use on
public roadways. Use of this setting results
in increased exterior noise, which may not
meet state and local laws and regulations.
It is the obligation of the driver to operate
the vehicle in a manner that complies with
state and local requirements. Only use the
Track Exhaust Mode setting at a
competition track or an off-road course
where elevated exterior vehicle noise is
acceptable.
Lap Timer
Gives you the ability to record lap times at
three separate tracks.
Launch Control
Note: The engine and transmission need to
be sufficiently warmed up before you can
enable launch control.
Maximizes your vehicle's traction from a
standing start.
To use launch control, follow these steps:
1.
Bring your vehicle to a complete stop.
2. Make sure launch control is enabled.
The indicator illuminates in the
instrument display when launch control
is enabled.
3. Shift the transmission into drive (D)
and apply the brakes.
4. Fully depress the accelerator pedal and
allow the engine RPM to stabilize.
5. Release the brake.
Note: For an explanation of the
transmission warning messages, See
Automatic Transmission (page 17).
45
Hide quick links:
Advertisement
Table of Contents
