Table of Contents
Advertisement
WPS USER GUIDE
WPS Connections
The WPS has two parallel wired Neutrik® NL4 connectors on an angled panel at the rear of the cabinet, recessed to avoid damage. Connect
speaker cables here.
NEUTRIK NL4 SPEAKON
The two NL4s are wired in parallel so either can be used as a nominal 'input' or 'link' output. WPS is a passive system and all speaker
cables and link cables must utilise 2-core cable.
When the system is configured for a single box resolution system each cabinet is connected to one amplifier channel. In two box resolution,
connection is made from an amplifier channel to the 'input' of one cabinet and the second 'link' NL4 is used to make a parallel connection
to the adjacent cabinet. The maximum is three box resolution – that is three cabinets connected to a single amplifier channel.
WPS USER GUIDE V1.0
19
Copyright © 2019 Martin Audio Ltd.
Advertisement
Table of Contents
