Table of Contents
Advertisement
WPS USER GUIDE
VU-NET 2.2
Overview
VU-NET is Martin Audio's application which is used to connect to iKON amplifiers and a growing number of products including the MLA
family, CDD-LIVE!, PSX and DD12. This makes it possible to create a system with products from several different ranges and control and
monitor them from a single software platform.
Connection to iKON amplifiers is made over a standard Ethernet network using off the shelf networking products so remote access to
control Wavefront Precision systems is extremely straightforward. Complex systems with large numbers of amplifiers can easily be created
using standard network switches, the system by default is configured with dynamic IP addressing so DHCP or APIPA support will be
required however a static IP configuration is also easily enabled.
VU-NET is used to upload the presets created using DISPLAY into the amplifiers which will automatically create a thumbnail of the
Wavefront Precision array that has been designed. Once the array has been created, all of the amplifier functions are available for control
to make any changes you may need to make to routing, polarity, delay or system EQ. Once the system is configured the amplifiers can be
kept online to give comprehensive monitoring of the system performance.
The application opens with a blank system diagram. It is possible to add products manually using the 'Palette' on the left, but this has
limited use. However, in practical applications the 'Discover Devices' button is used.
The application searches the network for all VU-NET enabled devices and will run an installation wizard to add them to the VU-NET project.
WPS USER GUIDE V1.0
14
Copyright © 2019 Martin Audio Ltd.
Advertisement
Table of Contents
