System Connections; Impedances - Martin Audio CCD5 User Manual

CDD
USER GUIDE

SYSTEM CONNECTIONS

All CDD Series and CSX Series speakers are fitted with low-profile four-pin push-lock connectors,
rated at 13 A (CDD5, CDD6 and CDD8) or 20 A (CDD10, CDD12, CDD15 and all CSX models).
These are mounted on the recessed rear panel, allowing for a very neat wiring job with no
protruding connectors.
To permit simple interconnection between multiple speaker cabinets on the same circuit, two of
the pins are designated as 'Link' connections; these can be used to "daisy-chain" the amplifier
output to the next speaker:
A mating connector is supplied with each cabinet. In a fixed installation, this can be fitted to
the speaker cables during first fix.

IMPEDANCES

All CDD Series loudspeakers have an impedance of 8 ohms. (Model CDD5 only - see section
below regarding 70/100 V-line operation)
Subwoofer Models CSX112 and CSX118 have an impedance of 8 ohms
Subwoofer Models CSX212 and CSX218 have an impedance of 4 ohms.
CDD User Guide V1.0
41