Landing The Array - Martin Audio Wavefront Precision Series User Manual

Landing the Array

Landing an array is simply a reversal of the rigging procedure outlined above, lowering the array and guiding the bottom four cabinets into
a WPS transport cart, unpinning the lower block of four, and repeating with the top four cabinets.
Lower the array until it is just above the cart. Disconnect the
speaker cables.
At the back of the array raise the cart.
Remove the LOCK pins from the rear rigging bracket on the
bottom four cabinets.
WPS USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
Raise the front of the cart and pin it in position to the front of
the array.
Pin the cart to the rear rigging bracket of the array.
Lower the array until the cart is on the ground taking the weight
of the array allowing the cabinets to collapse down until the
trapezoidal sides are touching.
38
WPS USER GUIDE