To Temporarily Cancel The Cruise Control; To Turn Off The Cruise Control - Subaru 2001 Outback Owner's Manual

the accelerator pedal.
At this time, the cruise control set indicator
light is illuminated in the combination
meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways.
. Press the "CANCEL" button.
. Depress the brake pedal.
. Depress the clutch pedal (MT models
only).
. Shift the select lever into the "N"
position (AT and CVT models).
. Shift the shift lever into the neutral
position (MT models only).
The cruise control set indicator light in the
combination meter turns off when the
cruise control is canceled.
Starting and operating
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (32
km/h) or more, press the "RES/SET"
switch to the "RES" side to return to the
original cruising speed automatically.
The cruise control set indicator light in the
combination meter will automatically illu-
minate at this time.
& To turn off the cruise control
There are two ways to turn off the cruise
control:
. Press the "CRUISE" main switch but-
ton again.
. Turn the ignition switch to the "Acc" or
"LOCK" position (but only when the
vehicle is completely stopped).
– CONTINUED –
7-39