Initialization Of Power Window; Trunk Lid (Legacy); To Open And Close The Trunk Lid From Outside - Subaru 2001 Outback Owner's Manual

2-24
Keys and doors
& Initialization of power win-
dow
If the vehicle's battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function
Initialize the power window in the following
procedure to reactivate such functions.
1. Close the driver's door.
2. Turn the ignition switch to the "ON"
position.
3. Open the driver's side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed com-
pletely.

Trunk lid (Legacy)

WARNING
. To prevent dangerous exhaust
gas from entering the vehicle,
always keep the trunk lid closed
while driving.
. Help prevent children, adults or
animals from locking themselves
in the trunk. On hot or sunny
days, the temperature in the
trunk could quickly become high
enough to cause death or serious
heat-related injuries including
brain damage to anyone locked
inside, particularly for small chil-
dren.
. When leaving the vehicle, close
all windows and lock all doors.
Also make certain that the trunk
is closed.
& To open and close the trunk
lid from outside
The trunk lid can be opened using the
remote keyless entry system. Refer to
"Unlocking the rear gate (Outback)" F2-
10.
To close the trunk lid, lightly press the
trunk lid down until the latch engages.
NOTE
. Do not leave your valuables in the
trunk when you leave your vehicle.
. Even when the trunk lid cannot be
opened using the remote keyless entry
system, you can open the trunk lid by
using the key. Refer to "Trunk lid
(Legacy) – if the trunk lid cannot be
opened" F9-19.
& To open the trunk lid from
inside
Press the trunk lid opener switch for more
than 1 second.