Illumination Brightness Control; Front Fog Light Switch (If Equipped) - Subaru 2001 Outback Owner's Manual

3-30
Instruments and controls
Illumination brightness con-
trol
The illumination brightness of the clock
display, audio, air conditioner, multi func-
tion display and meter/gauge dims under
the following conditions.
. when the light switch is in the "
" " position
. when the light switch is in the "AUTO"
position and the headlights illuminate
automatically
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not can-
celed even when the ignition switch is
turned to the "LOCK" position.
" or
Front fog light switch
(if equipped)
The front fog lights operate under the
following conditions.
. when the light switch is in the "
position
. when the light switch is in the "AUTO"
position and the headlights turn on auto-
matically
However, the front fog lights turn off when
the headlights are switched to high beam.
To turn on the front fog lights, turn the front
fog light switch on the turn signal lever
upward to the " " position. To turn off the
front fog lights, turn the switch back down
to the "OFF" position.
"