Undefined Command - Omron CPM1 Programming Manual

Response Format
Parameters
4-5-34 Undefined Command - - - - IC
Response Format
An end code of 00 indicates normal completion.
1 0
x 10 x 10
@ T S
Node no. Header
code
Characters (Response)
This is the data specified in TXD(48) that has been converted to ASCII.
This response is returned if the header code of a command cannot be decoded.
Check the header code.
x 10
@
Node no.
Data specified in TXD(48)
Characters
(122 max.)
1 0
x 10
I C
Header FCS
code
Section 4-5

↵
FCS Terminator

↵
Terminator