Table of Contents
Advertisement
2.2.2
Reading and Comparing Codes in Standalone Mode
Power supply
Object
with DMC
There is no connection to PROFIBUS.
VS 130 reads the codes and compares either the entire code or part of the code
with a user-defined string. If it was not possible to read code (the output signal
N_OK is set), an ejector removes the object from the conveyor.
Vision Sensor VS 130
A5E00199459-01
Processing unit
Sensor head
Ring flash
Conveyor
Direction of travel
Mounting
mechanism
Light barrier
System Integration
PG / PC
N_OK
Ejector
2-3
Advertisement
Table of Contents
