Table of Contents
Advertisement
Appendix
During the automatic interface selection, all the available serial interfaces are
investigated to find out whether or not data can be received from the processing
unit over them. The first interface to meet this requirement is selected.
Very occasionally, automatic detection fails to find a connected processing unit. If
the program does not find an interface, the following dialog box appears:
In this case, you have the option of either
•
running another automatic search or
•
selecting the interface to which the processing unit is connected manually.
To cancel the search, simply click the "Quit" button to exit the program.
You can see that a connection was established successfully because "Online" is
displayed in the status bar. You can also see which interface is being used for the
connection.
A-18
Vision Sensor VS 130
A5E00199459-01
Advertisement
Table of Contents
