Operation During The Tanning Session; Operating Panel - KBL megaSun 6900 Series Operating And Maintenance Manual

4.

Operation during the tanning session

When switching on the apparatus, the following information is
General
displayed for 2 seconds before the running text appears:
information
Firmware version of the display
Version of the control software
Sunbed type
Tube type
Running text
The start of the tanning program depends on the studio control
system. If a simple coin-operated system has been installed, the
tanning program is started by inserting coins or tokens. When
the warm-up time has elapsed the tanning lamps are turned on
automatically.
If the touch key "Start" is pressed during this warm-up time, the
lamps turn on immediately.
The facial tanners are always turned on only after a certain
delay.
Some of the basic features are set in service level I, such as
colour-stimulation, aroma therapy, time control etc. Studio staff
will set these options according to the customers' wishes.
4.1

Operating panel

Illustr. 4-1 The main display with key numbers (aquaCool is configurated)
The running text is displayed as long as the sunbed is in the
Main display
„waiting position". When the coin-controlled signal appears, the
functions are displayed and the sunbed can be operated by
touching the corresponding keys. Any input will be confirmed by
a beep tone.
2 3
1
6
7 8
Operation and Service megaSun 6900
4
5
0
9
7