Air-Conditioning Unit - KBL megaSun 6900 Series Operating And Maintenance Manual

Hide thumbs Also See for megaSun 6900 Series:
Table of Contents

Advertisement

Maintenance of
the exhaust air
system and the
air-conditioning
Step
1
Open the lower front cover and check the following
items in regular intervals:
2
The air hose of the air-conditioning unit must not have
any kinks.
3
The filter mats in the base section and in the canopy
section must be clean.
4
Check the exhaust air hose for kinks or damages,
and if there is an additional ventilator due to hose
overlength, check its function as well.
5
An adequate ventilation and air extraction in the studio
must be guaranteed at any time.
6
Check the correct position of the duct pane to make
sure that the base pane is adequately cooled.

5.11 Air-conditioning unit

Air hose
Condensation
hose leads
outside to the
condensate tank
Condensate pump
30
Checks
Operation and Service megaSun 6900
A clean and trouble-free exhaust air system prevents the
apparatus from overheating. The maximum hose length of 6 m
must not be exceeded unless there is an additional ventilator.
Procedure
Fan
Check the heat exchangers of the air-conditioning unit for dirt
particles each time a tube is replaced. Dirty heat exchangers
reduce the performance of the air-conditioning unit.
Open the front cover and vacuum-clean the heat exchangers, if
necessary.
Check the connection hose each time the tubes are replaced.
Defective hoses must be replaced.
Reference
see also
Section 5.10
see also
Section 5.7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Megasun 6900 superMegasun 6900 super cpiMegasun 6900 super powerMegasun 6900 super power cpiMegasun 6900 ultraMegasun 6900 ultra power cpi

Table of Contents