F-Code Database Polling - Muratec MFX-1500 Operating Instructions Manual

Beyond the basics
12. What you do now depends upon when you wish the transmission to begin.
• To have it begin now, skip to step 15.
• To delay it, proceed to step 13.
13. Press
COMMUNICATION OPTIONS
The display will show:
Delayed
Enter Time: 15/17:05
14.
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
Note: If you make a mistake or you want to change just one character in the
number, press to move the cursor leftward, or
rightward, to that character. Then re-enter until the number is just as
you want it.
15. Press .
START
If, in step 12, you chose an immediate transmission, your fax machine will begin
dialling. If you chose a delayed command, the machine will display "Reserved" on
the top line of the display, indicating that the machine has stored the command in
memory and will perform it later.

F-Code database polling

1. Press / to change to Fax mode, if necessary.
COPY FAX
2.
Press
COMMUNICATION OPTIONS
8.F-Code Polling
Comm.Option/Enter
3.
Press .
ENTER
Enter Sub-Address
_
4. Use the numeric keypad to enter the appropriate sub-address number. In this
example, we've entered 123456.
Enter Sub-Address
123456_
5.
Press . The display will show:
ENTER
Enter Password
_
2.60
, .
ENTER
.
to move it
eight times.
6. Use the numeric keypad to enter the appropriate password number. In this
example, we've entered 654321.
Enter password
654321_
Note: If you know that this sub-address does not have a password, skip to
step 8.
7.
Press . The display will show:
ENTER
Enter Fax Number
_
8. Enter the fax number either by pressing a one-touch key, entering a speed-dial
number or dialling from the numeric keypad. Do not press
9.
What you do now depends upon when you wish the transmission to begin.
• To have it begin now, skip to step 12.
• To delay it, proceed to step 10.
10.
Press
COMMUNICATION OPTIONS
The display will show:
Delayed
Enter Time: 15/17:05
11.
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
Note: If you make a mistake or want to change just one character in the
number, press to move the cursor leftward, or
rightward, to that character. Then re-enter until the number is just as
you want it.
12. Press .
START
If, in step 9, you chose an immediate transmission, your fax machine will begin
dialling. If you chose a delayed command, the machine will display "Reserved" on
the top line of the display, indicating that the machine has stored the command in
memory and will perform it later.
.
START
, .
ENTER
.
to move it