Erasing A Document Stored In A Batch Box - Muratec MFX-1500 Operating Instructions Manual

Beyond the basics

Erasing a document stored in a batch box

It's easy to erase a document stored in a batch box set up on your fax machine:
1.
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
2. Press , , 6, . The display will show:
PROGRAM N ENTER
Erase Batch Doc.
Enter Box No. _
3.
Use the numeric keypad to enter the number (1-5) of the batch box currently
"holding" the document you wish to erase.
4. Press . The display will show:
ENTER
Erase Batch Doc.
Enter File No. _
5. Use the numeric keypad to enter the document's two-digit file number
(00–39). If the file number is 00–09, be sure to enter the leading zero.
6. Press . The fax machine now gives you one last chance to change your
ENTER
mind about the erasure.
Erase Batch Doc.
Check Program/Enter
Important: To quit the operation without erasing this particular document,
press and go back to step 5.
PROGRAM
Important: To quit the operation without erasing this or any other document,
press . The machine will return to standby mode.
STOP
7.
Press . The fax machine will erase the desired document, then return to
ENTER
standby mode.
2.26
/ to change to Fax mode.
FAX