Poe Ports - Siemens RUGGEDCOM RSG2300P Installation Manual

RUGGEDCOM RSG2300P
Installation Guide
Specifications
For specifications on the available copper Ethernet ports, refer to
Specifications".
Section 3.2

PoE Ports

The RUGGEDCOM RSG2300P comes standard with two 10/100Base-TX Power over Ethernet (POE) ports powered
by an external power supply. Each port complies with the IEEE 802.3af standard and features auto-sensing and
automatic power off when cables are removed.
PoE ports are located in slots 1 and 2.
The total allowable power budget for all ports is 60 W. If the external power supply is less than 75 W, to prevent
exceeding the power budget, port priorities can be set via the RUGGEDCOM ROS operating system to disable low
priority ports when demand is too high. Ports can also be enabled/disabled and placed on a power schedule to
conserve power. For more information, refer to the RUGGEDCOM ROS User Guide for the RUGGEDCOM RSG2300P.
For information about connecting the external power supply, refer to
Power".
LEDs
Each port features a dedicated LED that indicates the state of the port.
State
Yellow (Solid)
PoE Ports
Name
Pin
10/100Base-TX
3 TX+
4 Reserved (Do
Not Connect)
5 Reserved (Do
Not Connect)
6 TX-
7 Reserved (Do
Not Connect)
8 Reserved (Do
Not Connect)
Section 4.5, "Copper Ethernet Port
Section 2.6.2, "Connecting External PoE
Description
Link established
Communication Ports
Description
1000Base-TX
BI_DB+ Transmit Data+
or Bi-Directional
Pair B+
BI_DC+ Transmit Data+
or Bi-Directional
Pair C+
BI_DC- Receive
Data- or Bi-
Directional Pair C-
BI_DB- Transmit
Data- or Bi-
Directional Pair B-
BI_DD+ Receive Data-
or Bi-Directional
Pair D+
BI_DD- Receive
Data- or Bi-
Directional Pair D-
Chapter 3
21