Replacing A Memory Module - Fujitsu PRIMERGY TX150 S6 Operating Manual

CSS components
8.2.3

Replacing a memory module

1
Figure 43: Removing a memory module
Ê Fold the assembly brackets outwards on both sides of the corresponding slot
(1).
Ê Pull the defective memory module out of the slot (2).
V
CAUTION!
Please note the equipping rules in the technical manual for the system
board.
2
Figure 44: Installing a memory module
Ê Carefully press the new memory module into the slot (1) until the fastening
tabs on both sides of it engage (2).
TX150 S6
2
1
Operating Manual
Non-hot-plug components
2
1
109