Non-hot-plug components
8.2.1
Replacing a memory module
8.2.1.1
Removing and installing a fan bracket
Before replacing the memory modules, you must first remove the fan bracket.
3
2
1
Figure 34: Removing the fan bracket: disconnecting the power cable, loosening the knurled
screws
Ê Disconnect the 10-pole plug of the power cable T26139-Y3952-V401 from
the fan backplane (1).
Ê Release the cable clip and take out the cable (2).
Ê Loosen the two knurled screws of the fan bracket (3).
106
1
2
Operating manual
CSS components
3
TX300 S5