Starting up and operation
Indicators on the hot-plug power supply units
Figure 28: Hot-plug power supply unit
The three LEDs to the left of the fan indicate the operating status of the power
supply unit, as shown in the following table:
Top green LED
Center orange
LED
Bottom green
LED
Table 2: LED indicators on the hot-plug power supply unit
Each of the three columns in the table indicates the status of the power supply
unit with the voltage on and off and with the server on and off. If the LED
indicators are different, an error has occurred. For diagnosis, consult the
Service Supplement or a service engineer.
TX150 S6
Mains voltage off Mains voltage on Mains voltage on
Off
Off
Off
Operating Manual
Controls and indicators
Server off
(Standby mode)
On
Off
Flashing
Server on
On
Off
On
75