Configuring The Server; Configuring The Onboard Sata Controller; Configuring The Pci Sas Controller With "Integrated Mirroring Enhanced - Fujitsu PRIMERGY TX150 S6 Operating Manual

Configuring the server

5.4 Configuring the server
This section contains information about configuring the server and installing the
operating system.
I
Make sure that the power saving functions are disabled in the Power
menu of the BIOS Setup during operation.
5.4.1

Configuring the onboard SATA controller

A SATA controller is integrated on the system board. You can configure the
onboard SATA controller either before or during ServerStart. Using ServerStart
is recommended.
I
The controller has its own configuration utility. More detailed information
may be found in the "LSI SATA Software RAID User's Guide" (on the
ServerBooks DVD under "Controllers").
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.
5.4.2 Configuring the PCI SAS controller with
"Integrated Mirroring Enhanced"
The server has a PCI SAS controller with "Integrated Mirroring Enhanced"
functionality. You can configure the PCI SAS controller either before or during
ServerStart. Using ServerStart is recommended.
I
The controller makes a separate utility available for IME configuration.
Further information is included in the "Integrated RAID for SAS User's
Guide" (on the ServerBooks DVD under "Controllers").
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.
78 Operating Manual
Starting up and operation
TX150 S6