Date & Time Set Procedure; Using The Cuff - HoMedics BPA-060 Manual

DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
2. The display will show a blinking number showing
the MONTH. Change the MONTH by pressing the
button. Each press will increase the number by
one in a cycling manner. Press the Set button
again to confirm the entry, and the screen will show a
blinking number representing the DAY of the month.
3. Change the date and time as described in Step
2 above, using the
numbers and the Set button
entries.
repeat process to set DAY,
HOUR and MINUTE
button to change the
to confirm the
Press the button
blinking MONTH
increasing MONTH
confirm the entry
13
USING THE ARM CUFF
Very Important: Proper cuff size is critical to accurate
.
measurement.
This monitor comes with two sizes of arm cuffs:
Standard Size Fits 9"–13" (23 cm – 33 cm)
Large Size Fits 13"–17" (33 cm – 43 cm)
The appropriate cuff is suitable for your use if the
colored arrow falls within the solid color line as
shown below.
Colored Arrow
MODEL# PP-BPCUFF5
Center tube over
middle of arm
Solid Colored Line
14