Date & Time Set Procedure; Using The Voice Assist Talking Function - HoMedics BPA-260-CBL Manual

DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the DATE/TIME SET button .
2. The display will show a blinking number showing the
HOUR. Change the HOUR by pressing the
Each press will increase the number by one in a cycling
manner. Press the DATE/TIME SET button
confirm the entry, and the screen will show a blinking
number representing the MINUTE.
3. Change the MINUTE, MONTH, DAY and YEAR as
described in Step 2 above, using the
change the numbers and the DATE/TIME SET button
to confirm the entries.
repeat process to set MINUTE,
MONTH, DAY and YEAR
button.
again to
button to
Press the button
blinking HOUR
increasing HOUR
confirm the entry
13
USING THE VOICE ASSIST
The Voice Assist feature will guide you through the
®
measurement procedure and also announce results after
your reading. The Voice Assist
substitute for reading and understanding the instruction
manual.
The Voice Assist feature has 3 modes:
®
• Instructions On Mode - Announces instructions and results
• Instructions Off Mode - Announces results only
• Quiet Mode - No voice
Setting the Voice Assist
1. Press the TALKING MODE button on the back of the
monitor. Each press of the TALKING MODE button will
cycle through the different modes.
2. When the appears with the letters "InS ON",
this indicates the monitor is in "Instructions On" Mode.
TALKING FUNCTION
®
®
Talking Function is not a
Mode:
®
14