Date & Time Set'procedure - HoMedics BPA-945 Manual

DATE & TIME SET'PROCEDURE
1. To adjust the date and time, press and hold the START/
STOP button for 3 seconds.
2. The display will show a blinking number showing the
MONTH. Change the MONTH by pressing the M button.
Each press will increase the number by one in a cycling
manner. Press the START/STOP button again to confirm
the entry, and the screen will show a blinking number
representing the DAY.
3. Change the DAY, YEAR, HOUR, & MINUTE as described in
Step 2. above, using the M button to change the numbers
and the START/STOP button to confirm the entries.
Press & hold the
START /STOP button
'
blinking MONTH
'
increasing MONTH
'
I
·
START
J
confirm the entry
_ STOP
~
f
repeat process to set DAY, YEAR, HOUR
and MINUTE