Date & Time Set Procedure - HoMedics BPW-930BT Manual

DATE & TIME SET PROCEDURE
Date and time can be set by two methods; either sync automatically using
your Bluetooth® mobile device, or set manually using the DATE/TIME and
SET buttons ( (9 &
+>
on the monitor.
If setting the date and time by syncing with your mobile device, it is important
that this is done prior to taking any measurements to ensure the date and
time are accurate.
To set using your Bluetooth mobile device:
1. Before taking the first measurement, open the HoMedics Health App on
your device. If you have not already installed the HoMedics Health App
onto your device, it is available to download on the App Store® and on
Google Play™. Make sure you have the app downloaded and open on your
mobile device before trying to sync the date and time.
2. Press the Bluetooth
C)
button on the monitor to
enable connection.
3. Once the Bluetooth connection is established, the date and time
will automatically update on the blood pressure monitor.
NOTE:
• Once the date and time have been successfully synced, future readings will
automatically have the correct date and time.
• If you are having trouble automatically syncing the date and time, make sure
Bluetooth is ON on your device and ON on the blood pressure monitor.
To set manually:
1. To set the date and time, press the DATE/TIME SET
(9 button.
2. The display will show a blinking number showing the MONTH. Change the
MONTH by pressing the
+
button. Each press will increase the number
by one in a cycling manner. Press the DATE/TIME SET (9 button again to
confirm the entry, and the screen will show a blinking number representing
the
DAY.