General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PBSA 20-Li A1 Translation Of The Original Instructions

GB IE

General description

The illustrations are on the
front and back fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- Battery-charger
- Battery
- 2 bits: PH1 50 mm and PH2 50 mm
- Storage case
- Instruction Manual charger and battery
- Instruction Manual

Overview

1 Drill chuck aperture
2 Keyless drill chuck
3 Torque adjustment ring
4 Speed selector
5 On/off switch
6 Direction of rotation switch
7 Bit holder
8 PH1 50 mm bit
9 PH2 50 mm bit
10 LED working light
11 Battery
11a Battery release button
12 Battery Indicator
12a Button for charge status display
13 Charger
14 Storage case
15 Metal belt clip
16

Functional description

The cordless drill with two-speed gearing
has a 25+1 level torque adjustment, left/
right running, a removable keyless chuck
and an LED working light.

Technical data

Cordless Drill ........... PBSA 20-Li A1
Motor voltage U ..........................20 V
Idling speed n
0
1st gear ............................ 0-400 min
2nd gear ......................... 0-1400 min
Maximum torque .......................... 35 Nm
Span-chuck ............................ 1.5-13 mm
Weight (without battery charger) .... 1.6 kg
Drilling capacity
for wood .......................... max. 30 mm
for steel ........................... max. 13 mm
Sound power level
(L ) ................... 71.4 dB(A), K
pA
Sound power level
(L ) ................. 82.4 dB(A); K
WA
Vibration (a )
h
max. ............... < 2.5 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
-1
-1
= 3 dB
pA
= 3 dB
WA
2 ; K= 1.5 m/s 2