Download Print this page

KTM Freeride E-XC 2018 Setup Instructions page 28

Hide thumbs Also See for Freeride E-XC 2018:

Advertisement

4 WORK
4.18
26
402145-12
Removing the 12 V battery
Warning
Risk of injury Battery gases cause serious chemical burns.
Keep batteries out of the reach of children.
Wear suitable protective clothing and goggles.
Avoid contact with battery gases.
Keep sparks or open flames away from the battery.
Only charge batteries in well-ventilated rooms.
With skin contact rinse the affected area with plenty of water.
Flush eyes with water for at least 15 minutes and consult a physician if battery gases have come into
contact with the eyes.
Warning
Environmental hazard Batteries contain environmentally-hazardous materials.
Do not dispose of batteries as household waste.
Dispose of batteries at a collection point for used batteries.
Position the KTM PowerPack
Lifting strap (70029022000)
The KTM PowerPack is resting flush on the electric motor.
Info
The KTM PowerPack is very heavy. A second person
can help with installation.
2
Tighten screws
.
Guideline
KTM PowerPack
attachment
Finishing work
(Option: HV 2 technical personnel)
Perform an equipotential bonding check (KTM PowerPack
installed).
(
p. 31)
Lock the seat.
(
p. 18)
Preparatory work
Fold the seat up.
(
p. 17)
1
in the vehicle.
M6
10 Nm (7.4 lbf ft)

Advertisement

loading

This manual is also suitable for:

F3001r1 2018