Advertisement
4.1
Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
4.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
Preparatory work
–
Deactivate the vehicle.
–
Fold the seat up.
–
Remove the KTM PowerPack.
(Option: HV 2 technical personnel)
–
Ascertain that the KTM PowerPack is at zero potential.
(
p. 30)
–
Ascertain that the discharge plug is de-energized.
(
p. 30)
–
Mount the covering cap.
Main work
–
Use the motor guard underneath the motor to raise the vehicle.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
Main work
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
401943-10
Finishing work
–
Install the KTM PowerPack.
(Option: HV 2 technical personnel)
–
Perform an equipotential bonding check (KTM PowerPack
installed).
–
Lock the seat.
(
p. 14)
(
p. 17)
(
p. 24)
(
p. 14)
1
to the ground
(
p. 25)
(
p. 31)
(
p. 18)
4 WORK
13
Advertisement
