3 SETUP
10
–
Mount the license plate holder with the license plate lamp,
turn signals, and reflector.
–
Connect the electrical components.
Info
The cable of the left turn signal is marked red.
The cable of the right turn signal is marked green.
M00699-01
–
Charge the 12 V battery.
–
Install the 12 V battery.
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
C00740-01
–
Make sure that the reflectors are glued on to the left and right
fork leg.
Info
The reflectors must not be covered by trim parts.
–
Apply the sticker included in the delivery (optional).
H02556-01
–
Mount the mirror clamps on both sides.
M00700-01
–
Mount and tighten the rear mirror on both sides.
M00701-01
(
p. 23)
(
p. 27)