4 WORK
4.16
24
Removing the KTM PowerPack
Warning
Risk of injury There is a risk of electric shock when working on high-voltage components.
Work on high-voltage components require special training, qualifications and tools.
–
Work which has not been described and explained may only be performed by correspondingly trained
KTM specialists.
–
Do not open the electric motor or the KTM PowerPack.
Warning
Environmental hazard A lithium-ion battery (KTM PowerPack) contains components and elements that are
harmful to the environment.
–
Never throw a KTM PowerPack into the household trash.
–
Dispose of the KTM PowerPack properly and in compliance with the applicable regulations.
402145-11
Guideline
The charging current, charging voltage or charging time
must not be exceeded.
Recharge the battery regu-
larly when the motorcycle is
not being used:
Finishing work
–
Install the 12 V battery.
–
Lock the seat.
(
p. 18)
Preparatory work
–
Deactivate the vehicle.
–
Fold the seat up.
(
p. 17)
Main work
–
Loosen screws
1
.
Note
Material damage Components damaged or destroyed by water
or dirt.
–
Mount the covering cap if you have removed the
KTM PowerPack.
–
Place the KTM PowerPack on a clean and dry surface.
–
Remove KTM PowerPack
Lifting strap (70029022000)
Info
The KTM PowerPack is very heavy. A second person
can help with removal.
3 months
(
p. 27)
(
p. 14)
2
.