Mercedes-Benz Audio 20 Supplement Manual page 67

ZA audio 20 NTG4.0 BR207/212 ECE ÄJ 2010/1a; 1; 2, en-GB
sabbaeu
Current disc (eject function is available)
:
Type of data carrier
;
Data carrier name (only if stored on the
=
disc)
X
To select a full magazine tray: slide
XVY or turn cVd to select the relevant
magazine tray.
X
Press W.
or
X
Press the corresponding number key 1 to
6.
You see the message Ejecting disc
<x>.... Afterwards you see the following
message:
X
Take the disc out of the slot.
If you do not take the disc out of the slot,
Audio 20 will draw it in again automatically
after a short while and reload it.
2010-02-09T14:36:10+01:00 - Seite 65
Version: 3.0.2.13
Audio CD and MP3 mode
Ejecting all CDs
X
Press the V eject button.
The magazine menu appears.
X
Select Eject all.
The CD changer ejects the last selected
disc. You see the message: Ejecting
disc <x>....
X
Take the disc out of the slot once you see
the Please remove disc <x>. message.
The CD changer switches to the next loa-
ded magazine tray and ejects the disc.
X
Repeat the last step until the magazine is
empty.
X
To finish ejecting: press the V eject
button again.
or
X
Press the % button next to the Audio 20
controller.
Switching on audio CD or MP3 mode
Option 1
X
Insert a CD ( Y page 62).
Audio 20 loads the inserted medium and
playback starts.
Option 2
X
Press h.
i The function button takes you directly to
the previously set disc mode (audio CD,
MP3 CD or Media Interface). Audio 20 can
65
Z