Mercedes-Benz Audio 20 Supplement Manual page 59

ZA audio 20 NTG4.0 BR207/212 ECE ÄJ 2010/1a; 1; 2, en-GB
sabbaeu
DAB radio display
Display/selection window with station
:
display
Name of the selected ensemble
;
Name of the current station (the category
=
symbol indicates available sub-pro-
grammes)
Sound settings
?
To search for an ensemble
A
Radio text
B
Memory functions
C
DAB functions
D
Switching wavebands
You can switch the radio between the FM
(VHF), MW, SW, LW and DAB wavebands.
X
Press the $ button on the control panel
repeatedly until the desired waveband
appears in the display.
i
In the MW, SW and LW wavebands,
Audio 20 shows the station frequency
instead of the station name.
Repeated pressing of the $ function but-
ton brings up the wavebands in the following
order: FM, MW, SW, LW and finally calls up
DAB radio mode. A further press of the button
returns you to FM radio mode.
2010-02-09T14:36:10+01:00 - Seite 57
Version: 3.0.2.13
Radio mode and DAB radio mode
Searching for an ensemble (DAB radio
mode)
An ensemble consists of multiple radio pro-
grammes. Every ensemble is transmitted in a
certain area (national, regional or local) in the
same way as a traditional AM/FM radio sta-
tion.
X
Press the $ function button on the con-
trol panel repeatedly until the DAB radio
display appears.
X
To switch to the menu: slide ZVÆ.
X
To start the search: select the << or >>
icon in the menu bar.
Once the search has been started, the
icons in the menu bar change to: ±.
Audio 20 searches upwards or downwards
for ensembles that it can receive. The sta-
tions of the next ensemble with adequate
reception are shown in the DAB radio dis-
play. If no ensemble can be found, the No
new ensemble found message appears in
the display.
X
To abort a search: select the ± icon in
the menu bar.
Audio 20 aborts the search.
The ± icon in the menu changes back to
the << and >> icons.
Name of the ensemble found
:
57