Mercedes-Benz Audio 20 Supplement Manual page 33

ZA audio 20 NTG4.0 BR207/212 ECE ÄJ 2010/1a; 1; 2, en-GB
sabbaeu
®
Bluetooth is a registered trademark of Blue-
tooth Special Interest Group (SIG) Inc.
Switching Bluetooth
X
Press the i function button.
The system menu appears.
X
Select SystemQActivate Bluetooth.
This switches Bluetooth
appears when Bluetooth
Audio 20 is now ready to utilise Blue-
®
tooth functions, e.g. receiving data from
other devices or connecting mobile
phones.
System language settings
This function sets the display menu language.
X
Press the i function button.
The system menu appears.
X
Select SystemQLanguage.
You see the language list. The # dot indi-
cates the current setting.
X
To select a language: turn cVd or slide
ZVÆ.
The list scrolls downwards or upwards.
X
To confirm the language: press W.
Audio 20 loads the selected language and
stores the setting.
If you select the Synchronise languages
setting, Audio 20 sets the language to that
which is set in the multifunction display.
i The language selection affects the input
speller and the smart speller.
Reset
i
X
X
®
on/off
X
®
on or off. A tick
X
®
is switched on.
2010-02-09T14:36:10+01:00 - Seite 31
Version: 3.0.2.13
You can reset Audio 20 to the factory set-
tings. All data is deleted, including personal
settings (i.e. station presets). Resetting is
recommended when handing over or
before selling the vehicle, for example.
Press the i function button.
The system menu appears.
Select SystemQReset.
A prompt appears asking whether you wish
to reset.
Select Yes or No.
If you select Yes, another prompt appears
asking whether you really wish to reset.
Select Yes or No.
If you select Yes, a message will be shown.
Audio 20 is reset and restarted.
Reset
31