Mercedes-Benz Audio 20 Supplement Manual page 65

ZA audio 20 NTG4.0 BR207/212 ECE ÄJ 2010/1a; 1; 2, en-GB
sabbaeu
i If the CD has a printed side, this must face
upwards when the CD is inserted. If neither
side is printed, the side to be played should
face downwards. The system may not be
able to play discs with copy protection.
i If, in addition to music files, the data car-
rier contains other files, the loading time
before the first track starts to play may be
longer.
Inserting a disc into the single CD drive
X
Press the 8 eject button.
If a disc is inserted, it will be ejected.
X
Take the disc out of the slot.
X
Insert a disc into the slot.
The disc is drawn in, and playback starts if
the disc has been inserted correctly and if
it is a permissible type.
Inserting discs into the CD changer
Inserting a single CD into the magazine
tray
The CD changer has an integrated magazine
with six trays.
X
Press the V eject button.
A menu shows the current load status of
the magazine trays. The last tray selected
is identified by a red digit.
X
To select a magazine tray: slide XVY or
turn cVd to select the relevant magazine
tray.
2010-02-09T14:36:10+01:00 - Seite 63
Version: 3.0.2.13
Audio CD and MP3 mode
X
To start loading: press W.
or
X
Press a number key, e.g. 1.
The CD changer switches to the selected
magazine tray. You see the message:
Please wait....
You will then see the message Please
insert disc <x>.
Only insert a CD when Audio 20 prompts you
to do so. Only insert one CD per magazine
tray.
X
Slide the disc into the slot with the printed
side facing upwards.
The CD changer draws the disc in and loads
it into the selected magazine tray. You see
the message Loading disc <x>...
i The loading process depends on the disc
type and may take a while. If no disc is
inserted for approximately 20 seconds, the
display returns to the magazine menu.
The CD changer plays the disc if:
it has been inserted correctly.
R
it is a permissible type of disc.
R
63
Z