Mercedes-Benz Audio 20 Supplement Manual page 60

ZA audio 20 NTG4.0 BR207/212 ECE ÄJ 2010/1a; 1; 2, en-GB
sabbaeu
Radio mode and DAB radio mode
58
Automatic switching to an FM radio
station
If the reception of a DAB radio station dete-
riorates, Audio 20 automatically switches to
a corresponding FM radio station, if the fol-
lowing conditions apply:
the FM station's frequency is available.
R
the Station fix menu item is deactiva-
R
ted.
i Do not switch to FM radio mode, if you
want to use this function.
If no reception is possible, you will see the
No reception message.
Setting Station fix
The "Station fix" function prevents Audio 20
from switching between a radio station's
alternative frequencies when operating in
DAB* radio mode.
X
Press the $ function button on the con-
trol panel repeatedly until the DAB radio
display appears.
X
Slide ZVÆ or turn cVd, select Station
fix and press W.
Depending on the previous state, switch
Station fix on O or off ª.
Selecting a station
Selecting a station from the station list
The station list is only available in the FM
waveband and DAB mode. It contains all the
stations that can currently be received and is
sorted alphabetically. For stations without a
programme service, the list shows the fre-
quency instead of the name.
2010-02-09T14:36:10+01:00 - Seite 58
Version: 3.0.2.13
X
Use the $ function button to select the
desired waveband.
X
Press the E or F button on the con-
trol panel.
or
X
In the radio display, select RadioQSta‐
tion list.
The station list appears.
Currently selected station
:
Station preset in station memory
;
X
To select a station: slide XVY or turn
cVd.
X
To select a station: press W.
Setting a station via the multifunction
steering wheel
X
In the audio menu in the instrument cluster:
press and hold the 9 or : button.
The next or the previous station from the
station list is set.
Selecting a station using the station
search function
The station search function is only available
in the MW, LW and SW wavebands.
X
Press the $ function button.
X
Slide XVY or turn cVd.
or
X
Press the E or F button on the con-
trol panel.
Station search scans up or down and stops
at the next station found.