Table of Contents
Advertisement
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check
•
Check/repair loose mounting bolts or fasten-
ers.
•
Check/repair worn or damaged wires.
•
Check/repair damaged tooling.
•
Clean debris and built-up grime off of machine.
•
Check/resolve any other unsafe condition.
Every 8 Hours of Operation:
Check/add headstock oil (Page 32).
•
Lubricate column, racks, and quill (Page 33).
•
Every 90 Hours of Operation:
Lubricate quill rack and pinion (Page 33).
•
Every 180 Days of Operation:
Change headstock oil (Page 32).
•
Model G0779 (Mfd. Since 09/14)
Cleaning &
Protecting
Sawdust, wood chips, and metal chips left on the
machine will invite oxidation and a gummy residue
buildup around the moving parts. Use a brush and
shop vacuum to remove chips and debris from the
working surfaces of the mill. Never blow off the
mill with compressed air, as this will force metal
chips deep into the mechanisms and may cause
injury to yourself or bystanders.
Remove any rust build-up from unpainted cast
iron surfaces of your drill press and treat with a
non- staining lubricant after cleaning.
Keep unpainted cast iron surfaces rust-free with
regular applications of ISO 68 way oil (see Page
28 for offerings from Grizzly).
Lubrication
An essential part of lubrication is cleaning the
components before lubricating them.
This step is critical because grime and chips build
up on lubricated components, which makes them
hard to move. Simply adding more lubricant will
not result in smooth moving parts.
Clean all exterior components in this section with
mineral spirits, shop rags, and brushes before
lubricating.
DISCONNECT
MACHINE
BEFORE PERFORMING LUBRICATION!
NOTICE
Follow reasonable lubrication practices as
outlined in this manual. Failure to do so
could lead to premature failure of your
machine and will void the warranty.
FROM
POWER
-31-
Advertisement
Table of Contents
