Advertisement
8. Set in Target: Record—Begin Capture
When starting a capture session
the active status of all devices is cleared in the
l
the
pane is emptied, and
Security
l
the
pane retains all prior logged events.
Event Log
l
On the Capture Toolbar, click on the
the
Record
from all active Bluetooth devices within range and is recording data on the PC.
On the Capture Toolbar, clicking on the
options will halt live capture.
The
Wireless Devices
devices for analysis can be done while recording.
Note: The Capture Toolbar
analysis.
The
pane will show all encrypted Bluetooth links.
Security
The
pane will begin to populate with information, warnings, and error messages.
Event Log
The
will show a running total of captured packets.
Status Bar
Note: Starting a new capture session will clear all unsaved data from both the Set in Target hardware and the
Frontline software. If it has not been saved, then a pop-up warning message will appear.
9. Set in Target: Selecting Devices for Analysis
Once a Set in Target capture session starts by clicking on
data from wired connections is being captured. To analyze the data using the Frontline software, you select specific devices of interest
to include in the analysis.
Frontline Technical Support: Phone +1-434-984-4500 or email tech_support@fte.com
Wireless Devices
Record
button changes to
Recording
Recording
and
Wired Devices
button will be grayed out until some wireless devices have been selected for
Analyze
Record
Set in Target Wireless Devices Pane
and
panes ,
Wired Devices
button, or select
Record
, SoderaSodera LE Sodera or Sodera LE hardware is capturing data
button, or selecting
pane populates with any newly discovered devices. Selecting
on the Capture Toolbar, data from all active devices within range or
from the
menu option. When
Capture
from the Capture menu
Recording
Advertisement
