Siemens SINUMERIK 840Di Function Manual page 1357

Pulse diagram
(1)
(2)
(3)
(4)
(5)
(6)
Call example
CALL FC 7 (
Start :=
ChgdRevNo :=
Ready :=
Error :=
u m 20.6;
r m 20.5;
spb m001;
l db61.dbw 12;
ow w#16#0;
JC error;
m001:
error:
r m 20.5;
PLC Basic Program Solution Line (P3 sl)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Activation of function
Positive acknowledgment: Tool management has been transferred
Reset function activation after receipt of acknowledgment
Signal change by means of FB
This signal chart is not permissible. The job usually has to be terminated as the new tool
positions need to be forwarded to the tool management in the NCK.
Negative acknowledgment: Error has occurred, error code in output parameter error
//Tool management transfer of block for revolver
m 20.5, //Start := "1 " => transfer trigger
DB61.DBB 1,
m 20.6,
DB61.DBW 12);
//Poll ready
//Reset start
//Jumps, if everything OK
//Error information
//Evaluate error
//Jumps to troubleshooting, if <> 0
//Start of another program
//Reset start, if an error has occurred
Detailed Description
2.12 Block descriptions
2-163