Siemens SINUMERIK 840Di Function Manual page 1044

Detailed description
2.12 Block descriptions
The magazine location to be traversed can be qualified by the following:
• T number of the tool
Or
• Tool identifier and duplo number
Or
• Direct specification of the location in the location_number_from
Parameterization
Signal
PIService
Unit
Addr1
WVar1
WVar2
WVar3
WVar4
WVar5
WVar6
PI service: LOGIN
Create password
Function:
Transfers the parameterized password to the NCK. The passwords generally consist of 8
characters. If required, blanks must be added to the string of the password.
Example:
Password: STRING[8] := 'SUNRISE?';
2-132
The location where the tool is positioned traverses; the tool identifier, duplo number,
location number_from and magazine number_from parameters are irrelevant (i.e., values
"" , "-0001", "-0001","-0001").
The location where the tool is positioned traverses; the T number, location number_from
and magazine number_from parameters are irrelevant (i.e., value "-0001" each).
and magazine_number_from parameters
The tool-qualifying parameters T number, tool identifier and duplo number are irrelevant
(i.e., values "-0001", "", "-0001").
Type
ANY
INT
STRING
INT
INT
INT
INT
INT
INT
Value range
PI.TMPOSM
1, 2
max. 32 characters
Power Line Basic PLC Program (P3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Meaning
Position magazine
location or tool
TOA
Tool identifier
T number
Duplo number
Location_number_from
Magazine_number_fro
m
Location number_ref
Magazine number_ref