Setting Data; Channelspecific Setting Data - Siemens SINUMERIK 840Di Function Manual

Data Lists

5.2 Setting data

5.2 Setting data
5.2
5.2.1 Channel-specific setting data
Number Identifier: $SC_
42442 TOOL_OFFSET_INCR_PROG
42470 CRIT_SPLINE_ANGLE
42480 STOP_CUTCOM_STOPRE
42494 CUTCOM_ACT_DEACT_CTRL
42496 CUTCOM_CLSDT_CONT
42900 MIRROR_TOOL_LENGTH
42910 MIRROR_TOOL_WEAR
42920 WEAR_SIGN_CUTPOS
42930 WEAR_SIGN
42935 WEAR_TRANSFORM
42940 TOOL_LENGTH_CONST
42950 TOOL_LENGTH_TYPE
42960 TOOL_TEMP_COMP
42974 TCARR_FINE_CORRECTION
5-4
Description
Retraction of tool compensations on incremental
programming
Corner limit angle for the compressor with COMPCAD
(changed in SW 7.1 and higher)
Alarm response for tool radius compensation and
preprocessing stop
Approach/retraction behavior for tool radius
compensation in blocks without travel information
Maintain stability of approach/retraction behavior for
tool radius compensation in blocks
Mirror tool length compensation
Mirror wear values of tool length compensation
Mirror wear values of machining plane
Invert sign of all wear values
Transformation of wear values
Retain the assignment of tool length components
when changing the machining plane
(G17 to G19)
Assignment of the tool length components
independent of tool type
Temperature compensation value in relation to tool
Fine offset TCARR on/off
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Tool Compensation (W1)