Siemens SINUMERIK 840Di Function Manual page 1158

Detailed description
2.12 Block descriptions
SW 4 and lower
Source:
MCP button
INC 1 ... 10 000, INC Var.
INC 1 ... 10 000, INC Var.
INC 1 ... 10 000, INC Var.
Source:
MCP button
INC 1 ... 10 000, INC Var.
(up to SW 4)
Direction keys rapid traverse override
The transfer is dependent upon the selected axis. The corresponding interface bits are
deleted for axes that are not selected.
Source:
MCP button
Direction key +
Direction key -
Rapid traverse override
Direction key +
Direction key -
Rapid traverse override
Direction key +
Direction key -
Rapid traverse override
Source:
MCP button
Direction key +
Direction key -
Rapid traverse override
2-246
Destination:
Interface DB (Parameter ChanNo)
DB21, ... DBB13, Bit 0 to 5
DB21, ... DBB17, Bit 0 to 5
DB21, ... DBB21, Bit 0 to 5
Destination:
Interface DB (6 axis DBs)
DB31, ... DBB5, Bit 0 to 5
Destination:
Interface DB (Parameter ChanNo)
DB21, ... DBX12.7
DB21, ... DBX12.6
DB21, ... DBX12.5
DB21, ... DBX16.7
DB21, ... DBX16.6
DB21, ... DBX16.5
DB21, ... DBX20.7
DB21, ... DBX20.6
DB21, ... DBX20.5
Destination:
Interface DB (6 assigned axis DBs)
DB31, ... DBX4.7
DB31, ... DBX4.6
DB31, ... DBX4.5
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Power Line Basic PLC Program (P3)