Siemens SINUMERIK 840Di Function Manual page 1039

PI service: DELETO
Delete tool
Function:
Deletes the tool assigned to the transferred T number with all cutting edges (in TO, in some
cases TU, TUE and TG (type 400), TD and TS blocks).
Parameterization
Signal
PIService
Unit
WVar1
PI service: CREATO
Create tool
Function:
Creation of a tool with specification of a T number. The tool is entered as existing in the tool
directory area (TV). The first "cutting edge" D1 (with zero contents) is created for tool offsets
in the TO block. D1 (with zero contents) is also created for the OEM "cutting edge" data in
the TUE block - if one is present. If a TU block exists, it will contain the data set for the tool.
Parameterization
Signal
PIService
Unit
WVar1
PI service: CREACE
Create cutting edge
Function:
Creation of the cutting edge with the next higher/next unassigned D number for the tool with
the transferred T number in TO, TS (if present). The cutting edge for the OEM cutting edge
data is set up simultaneously in the TUE block - if one is present.
Power Line Basic PLC Program (P3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Type
ANY
INT
INT
Type
ANY
INT
INT
Value range
PI.DELETO
1, 2
Value range
PI.CREATO
1, 2
Detailed description
2.12 Block descriptions
Meaning
Delete tool
TOA
T number
Meaning
Create tool
TOA
T number
2-127