Upgrades For Tool Length Determination; Working With Tool Environments; General - Siemens SINUMERIK 840Di Function Manual

Detailed Description

2.10 Working with tool environments

Example 2
Machine data are to be used to define that compensation D2 and sum offset DL=1 are
activated on a tool change
(MD20270 $MC_CUTTING_EDGE_DEFAULT=2,
MD20272 $MC_SUMCORR_DEFAULT=1):
T5 M06
D1 DL=3
X10
DL=2
X20
DL=0
D2
X1
DL=2
D1
2.9.5

Upgrades for Tool Length Determination

2.10 Working with tool environments
2.10
2.10.1

General

Functions
The current states of tool data can be processed using the functions below, which are
generally available:
• Save
• Deletion
• Read
• Modify
A further function can be used to determine information about the assignment of the tool
lengths of the active tool to the abscissa, ordinate and applicate.
2-138
; Tool number 5 is loaded - D2 + DL=1 are active
(= values of MD).
; Compensation D1 + sum offset 3 of D1 are activated.
; Compensation D1 + sum offset 2 are activated.
; Sum offset deselection, only compensation D1 is now active.
; Compensation D2 is activated - sum offset DL=1 is activated.
; Compensation D2 + sum offset 2 are activated.
; Compensation D1 + sum offset 1 are activated.
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Tool Compensation (W1)