Siemens SINUMERIK 840Di Function Manual page 1166

Detailed description
2.13 Signal/data descriptions
Addresses in DB21, ...
DBB 261
DBB 262
DBB 263
DBB 264
G functions (values)
A full list of all G functions can be found in:
References:
/PG/ Programming Guide, Basics
2.13.4 Message signals in DB 2
General
DB 2 allows the user to display the messages for individual signals on the operator panel. As
the lists of interface signals show, signals are divided into predefined groups. When a
message occurs, disappears or is acknowledged, the number entered in the message
number column is transferred to the MMC. Text can be stored in the MMC for each message
number.
References:
/IAD/ Installation and Start-Up Guide; Message Numbers
Note
The number of user areas can be parameterized via FB 1.
After the configuration has been modified (FB 1: MsgUser), DB 2/3 must be deleted.
Channel areas in DB 2
Area
Channel 1
Channel 1, geo axes
Channel 2
Channel 2, geo axes
Channel 3
Channel 3, geo axes
Channel 4
Channel 4, geo axes
2-254
Variable
G_FKT_GR_54
G_FKT_GR_55
G_FKT_GR_56
G_FKT_GR_57
Address
DBX0.0 - DBX11.7
DBX12.0 - DBX17.7
DBX18.0 - DBX29.7
DBX30.0 - DBX35.7
DBX36.0 - DBX47.7
DBX48.0 - DBX53.7
DBX54.0 - DBX65.7
DBX66.0 - DBX71.7
Type Initial setting
Byte 0
Byte 0
Byte 0
Byte 0
Message number
510.000 -- 510.231
511.100 - 511.315
520.000 - 520.231
521.100 - 521.315
530.000 - 530.231
531.000 - 531.315
540.000 - 540.231
541.100 - 541.315
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Comment
Active G function of group 54
Active G function of group 55
Active G function of group 56
Active G function of group 57
Power Line Basic PLC Program (P3)