Cable - Sony Ericsson P900 User Manual

This is the Internet version of the user's guide. © Print only for private use.
Security
On the tab you can set the Bluetooth security related
Settings
settings of your P900.
Bluetooth on All Bluetooth wireless technology functionality from
your P900 works. Visibility according to the
to other devices setting.
Set Bluetooth to Off
will decrease battery drain. Bluetooth will
automatically switch on if you use
Bluetooth from the applications
Visible to
Yes: All Bluetooth wireless technology functionality
other devices
from your P900 works.
No: All Bluetooth wireless technology functionality
from your P900 works but you cannot receive
beamed items, and other devices cannot initiate
pairing with your P900. You cannot use your P900 as
a modem, it is not possible to connect from a PC and
voice dialling from a headset is not possible.

Cable

Use to set the cable connection mode and the connection
Cable
parameters used when communicating through your P900's
cable port.
• Set the cable connection mode. Please note that you must set
the mode to when using the P900 as a modem and
Modem
when using the DUN (Dial-up Networking) Wizard.
Control panel
Visible
if you do not use Bluetooth, it
Send as >
• Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P900 via the desk stand to a USB port on
your PC, use the following (default) settings:
Baud rate
460800
Parity None
Stop bits 1
Character length
8
Flow control
CTS/RTS
Tip You can set the cable connection mode when the Flip is
closed by selecting
Applications >
Cable.
Connections >
147