Using Your P900 As A Modem - Sony Ericsson P900 User Manual

This is the Internet version of the user's guide. © Print only for private use.

Using your P900 as a modem

Your P900 contains a complete GSM/GPRS modem, so you can
use it to connect your PC to the Internet or corporate
intranet.Your P900 appears to the laptop like a normal modem.
You link the laptop to your P900 using Bluetooth wireless
technology, infrared, or cable (USB or serial).The connection
over the air can be by any of the bearers that your P900
supports:
• GPRS
• HSCSD (High-speed Circuit Switched Data)
• CSD (Circuit Switched Data).
A Windows® modem driver file and a PC utility, the
is provided on your
Networking Wizard,
wizard will help you configure DUN (Dial-Up Networking)
entries on your PC for GPRS and HSCSD connections.
Once paired with a Bluetooth-enabled laptop, your P900 is
ready to make a connection to the Internet or corporate network.
Because Bluetooth is wire-free and requires no line-of-sight
alignment, you can place the laptop in a comfortable position
and let your P900 remain in your pocket, briefcase, or even be
placed up to 10 metres away.
If you wish to use an infrared link, the range is typically up to 1
metre. The two infrared ports must be kept in line of sight, at an
angle of no more than approximately 30 degrees.
168
Dial-Up
CD. The
PC Suite for P900
The Dial-Up Networking Wizard
The wizard simplifies creating GPRS DUN connections by
setting the proper values in the PC DUN entry and linking the
entry to one of the GPRS configurations in your P900. You can
also view and modify the GPRS settings in the P900.
For HSCSD DUN entries, it updates the modem settings such
that the specified data rate and type of bearer (ISDN / Analogue)
will be used when you make a DUN connection.
You can view or change the DUN entries created with the
wizard using the standard Windows® DUN user interface.
The Dial-Up Networking Wizard software included in the
must be installed in your PC and your P900 must
Suite for P900
be connected to the PC via cable, infrared or Bluetooth wireless
technology. See 'Connecting to other devices' on page 128.
Make sure that you have any information concerning, for
example, phone numbers, names of servers or domains, that the
server that you want to connect to may require.
To set up a GPRS or HSCSD (High-Speed Circuit Switched
Data) connection using the Dial-Up Networking Wizard
1. Start the
Dial-Up Networking Wizard
folder of the Start menu on your PC.
2. Choose Create a new Dial-Up connection.
3. Follow the instructions in the wizard.
Getting started with Internet and Messages
PC
from the Sony Ericsson