Computer; Service Card Reader/Service Card; Sony Ericsson Programming Interface Cable - Dcu-60; Infrared Device - Sony Ericsson W710 Installation Instruction, Mechanical

2.2 Computer

IBM compatible computer is required. The computer should include at least two USB-
ports. Refer to Equipment List for minimum requirements.

2.3 Service Card Reader/Service Card

NOTE!
The Service Card Reader is delivered with the necessary software and instructions for
installation. The Service Card Reader should be connected to an USB-port on the
computer. The Service Card should be inserted into the Service Card Reader.
Smart Card Reader
2.4 Sony Ericsson programming interface cable – DCU-60
The cable is the interface between the computer and the phone. DCU-60 cable should
be connected to an USB-port on the computer.

2.5 Infrared Device

An RS 232 or USB type infrared adapter or another phone may be used.
Install according to the manufacturer's instructions.

2.6 Bluetooth Device

Any Bluetooth device as headset, other Bluetooth phone or other Bluetooth device can
be used to verify the Bluetooth function in the phone. Set up the connection according to
the chosen equipments manufacturer instructions.
1/00021-1/FEA 209 544/601 B
©
Sony Ericsson Mobile Communications AB
The Service Card is only needed for printing labels and when flashing
offline
Installation Instruction, Mechanical
Service Card
3(5)