Send And Receive - Sony Ericsson P900 User Manual

This is the Internet version of the user's guide. © Print only for private use.
4. In the tab tap . Your P900 searches for all devices
Devices Add
in the vicinity and lists them.
5. When asked for a passcode, enter the headphone's passcode
on your P900.
6. If in the future you want to allow the headphone to connect to
your P900 without you explicitly approving each connection,
you should select
Control panel > Connections > Bluetooth >
, select the headphone and the check box
Devices
.
connect without confirmation
To remove a paired device from your P900
Select a device in the list and select
Passcodes
Passcodes ensure that the device you pair with really is the
device you think it is. A passcode is a set of numbers and/or
letters (at least four characters) that you agree to exchange with
the owner of the other device. Simply agree a passcode with the
other user and each enter the same code into both devices when
asked for it. The actual code is up to you; the important thing is
that you both enter the same code. Accessories like headsets
often have a default passcode, usually '0000', see the specific
user guide.
132
Allow to
.
Remove

Send and receive

You can send items via Bluetooth wireless technology in any
application if there is a
Send as
. If you receive an item via Bluetooth wireless
Bluetooth
technology, a dialogue box appears with two options:
. opens the associated application which shows the
Done View
item; saves it in the
Done Beamed
Bluetooth share
You can make it possible for other users to transfer items from
your P900. To make an item accessible, select
. The item is then copied to the
Shared
by other users. When a user requests to access your
folder, a request dialogue is shown, where you can
the transfer.
Reject
command. To send, select
or
View
folder in .
Messages
Send as > Bluetooth
folder, accessible
Shared
Shared
or
Accept
Connecting to other devices