Sony Ericsson P900 User Manual page 152

This is the Internet version of the user's guide. © Print only for private use.
Dial-Up and High-Speed Dial-Up Advanced tabs
Select the check box Post connect terminal
• The login script of the account that you are setting up
requires that you input certain information or you will
need to respond to prompts from the Internet account.
You are connecting to a Dial-Up account that uses Secure
Access generated by a separate smart card or password
generator.
Proxy
For an explanation of these settings, see
'GPRS Advanced tabs' on page 150.
Speed
You can only increase the speed of your connection if you
have a High-Speed Dial-Up account with your network
operator.
Secure
To enable secure access for this Internet account you
must link it to a vendor-associated Secure Token in this
dialogue:
1. Select the Enable secure access check box.
To create or delete Secure Tokens on your P900, select
Control panel > Other >Secure tokens
2. Select the vendor and token names of the Secure Token
that you want to link to this account from the drop-down
lists.
Other If your Internet Service Provider (ISP) supports Point to
Point Protocol (PPP) extensions, you can select the
Enable PPP extensions
your P900 to provide features such as encryption, which
increases the security of your Internet connection.
152
if:
Proxy in the
.
check box. PPP extensions allow
To edit an Internet account
1. On the tab, select the account in the list.
Accounts
2. Select .
Edit
3. Change your settings as desired.
4. Select .
Done
Note If you change the
Connection type,
account will be deleted.
To delete an Internet account
1. On the tab, select the account in the list.
Accounts
2. Select .
Delete
3. Select .
Done
Other tab
You can use the and
Dial-Up timeout
up your P900 to disconnect automatically from the Internet, if
you are not using it. The connection is broken after the period
you specify has lapsed.
Preferred Mode (bearer preference)
Please note that your P900 can be used for either voice (or GSM
data) calls or transferring GPRS data, but not both at the same
time. It may, however, still be connected to GPRS. As an
all account data for that
settings to set
GPRS timeout
Control panel