Method Of Transportation / Conveyance / Storage - Daikin AKZ9 Series Instruction Manual

PIM00318A_EN.fm Page 5 Tuesday, October 26, 2010 12:37 PM

Method of Transportation / Conveyance / Storage

Precautions on transportation / conveyance / storage
1. During transportation or conveyance, wear gloves and a helmet.
2. Do not transport or convey the product by any method other than that specified below.
3. For a product with a tank (-T), the unit may fall when transport or convey by hanging with the eye plate if the tank is filled
with oil.
Do not transport or convey the unit after installing the tank, which is prepared by the customer, by hanging the eye plate. The
unit may fall.
4. For the different-voltage model (-047, -048), carry out the transportation or conveyance using the hanger of transformer box.
If you hang it using the eye plate, it may fall.
5. Set the ambient storage temperature to 0 to 55˚C (annual average 25˚C) and set the ambient humidity to 95% (RH) or less
(annual average is less than 75%).
Carry out the transportation or conveyance according to the following method.
For other than
different-voltage model (-047, -048)
Stay away from the product during transportation or conveyance using the hanging tool.
Eye plate
For
different-voltage model (-047, -048)
Use the protector to protect the external plate.
Carry out the transportation or convey-
ance by fixing the hanging tool to the
right and left eye plates.
Hanger
5