Names And Functions Of The Control Panel Parts - Daikin AKZ9 Series Instruction Manual

PIM00318A_EN.fm Page 16 Tuesday, October 26, 2010 12:37 PM

Names and Functions of the Control Panel Parts

Outline of control panel
No. Name
(1)
Power lamp (Green)
(2)
Operation mode indicator
Operation mode/data
(3)
number display
(4)
Data display
(5)
[SELECT] (selection) key
(6)
[DOWN] key
(7)
[UP] key
(8)
[ENTER] (registration) key
(9)
Timer mode lamp (Green)
(10) Alarm lamp (Red)
(11) Warning lamp (Green)
16
(1) (2) (3) (10)
(5) (6)
Lit while power supply is ON.
Indicates the control panel operation mode.
NORMAL : Normal mode
SETTING : Operation setting mode
MONITOR : Monitor mode
TIMER : Timer setting mode
SET
Display the current operation mode (NORMAL/SETTING), or the data number
currently displayed on the data display.
Displays various data.
The displayed data vary depending on the operation mode and data number.
Used to select each mode.
Decrements the number of operation mode or data number/value by one.
If you keep pressing this key, the number is decremented by ten.
Increments the number of operation mode or data number/value by one.
If you keep pressing this key, the number is incremented by ten.
Registers an operation mode, data number or data changed.
Blinks while the unit is halted in the timer mode.
When an alarm is activated:
Blinks (Operation stops).........................Alarm level 1
Lit (Only the compressor stops).............Alarm level 2
When a warning is activated:
Blinks (Serious warning).........................Warning level 1
Lit (Minor warning)...................................Warning level 2
(11) (9)
(7) (8)
Description
(4)
Reference page
17
page
24
page
39 · 40
page
41
page